Wireless Access Point
- Model No:iSiS Wi-Fi Access Point
- Description
Description:
The iSiS Wi-Fi Access Point is designed to be operated within a safe area. The Ex i antenna interface can facilitate an antenna being placed in zone 1 or 2.
- Lightweight ATEX Zone 1 Access point
- Intrinsically Safe Output allows use of any suitably certified antenna in the hazardous area
- No need for heavy, and expensive Ex d solutions
- Can be used as Access Point, Bridge or repeater
- Fully configurable to meet statutory Wi-Fi requirements worldwide
- Quick and easy set-up
- Inexpensive way to extend your WiFi network into a hazardous area.
- ISiS-Ex certified Antenna available
Specifications:
Power Requirements :
100 - 240V, 50/60Hz, 0.3A rms at 230V AC input.
Interface :
- Standard IEC, switched, filtered and fused (1A) power input.
- Industrial strength, shielded RJ45 Ethernet input.
- Ethernet connection, 10/100 Base Tx. Auto sensing
Maximum transmit output power:
20dBm (100mW)
Receiver sensitivity:
| 802.11a/g | 54Mps: -73dBm |
| 6Mps:-92dBm | |
| 802.11b | 11Mps:-90dBm |
| 1Mps:-95dBm |
Radio Link:
Tri-band wireless Wi-Fi IEEE 802.11a/b/g/h & Super AG
Radio data rate:
Up to 108Mps ( Super AG mode)
Security:
4/128 bit WEP, WPA-PSK, WPA2-PSK, IEEE 802.1X (RADIUS) authentication, MAC address filtering, SSID broadcast control.
Approvals:
| ATEX: |
EN60079-0, EN 60079-11 |
| Radio: | EN301489-1, EN301489-17 |
| EMC: | CE EN55022, EN55024, FCC Part 15 subparts B, C & E |
This is a typical Specification; if you have other requirements please Contact Us
